Advertisement
TO FLIP FABRIC
TO FLIP FABRIC
TO FLIP FABRIC
TO FLIP FABRIC
TO FLIP FABRIC
1. Lay the awning assembly on a large table.
2. With a screwdriver, pry open the crimped channel at each
end of the header rail as shown in FIG. 7. Slide the fabric
out of the header rail.
3. Unroll the fabric and remove the two screws attaching the
fabric to the aluminum tube.
4. Slide the aluminum tube out of the fabric pocket. Flip the
tube end-for-end, and reinsert it back into the pocket.
5. Align the aluminum tube as shown in FIG. 8. Insert the two
screws into the predrilled holes.
6. Roll up the fabric. Flip the rolled fabric end-for-end. Slide
the upper edge of the fabric into the header rail channel.
7. Using a pair of pliers, crimp the channel closed again at
each end of the awning.
FIG. 7
FIG. 8
ALUMINUM
TUBE
4
Insert screws through fabric
& into predrilled screw holes
FABRIC
Advertisement
