Panasonic DVCPRO AJ-DE77P Operating Instructions Manual page 23

Non-linear editing system
Hide thumbs Also See for DVCPRO AJ-DE77P:
Table of Contents

Advertisement

q
Troubleshooting
Symptoms related to memory
E What is displayed as the memory|
è Has the memory been increased inappropriately or has the memory
size differs from the size of the|
insertion slot been changed?
memory actually provided.
When
the product is shipped, two 32MB
EDO memory boards
'yielding a total memory size of 64MB are installed.
WM At startup,
the
memory
check|
"65536 KB" appears as the memory check display during startup.
keeps running, and operation fails
to advance to the next step.
R The
main
unit's
internal
VTR|
@ Has "Internal 4xVTR" been set as the control device for the editing
cannot
be
controlled
from
the|
application program?
editing application program.
When "External VTR..." or "AUX" has been selected as the device,
the internal VTR will not operate even when the on-screen function
buttons are clicked.
è Has a tape been loaded into the main unit's internal VTR?
The main unit's internal VTR cannot be controlled when no tape has
been loaded into it or when its tape has been ejected.
@ The
external
VTR
cannot
bei e Has the connecting cable for controlling the external VTR been
controlled
from
the
editing)
connected properly?
application program.
The external VTR cannot be controlled if the RS-422A 9-pin control
cable (option) has not been connected or if an error is made in the
connectors which have been connected.
For details on the connections, refer to the main unit's rear panel
connection diagram. (See page 14)
$ Has "remote control" enable been set as the external VTR setting
mode?
)
For details on the remote control mode settings, refer to the manual
accompanying the external VTR.
è Has "External VTR..." been set as the control device for the editing
application program?
When "Internal 4xVTR" or "AUX" has been selected as the device,
the external VTR will not operate even when the on-screen function
buttons are clicked.
e Has a tape been loaded into the external VTR?
The external VTR cannot be controlled when no tape has been
loaded into it or when its tape has been ejected.
=93 =

Advertisement

Table of Contents
loading

Table of Contents