Table of Contents
Advertisement
Storing Equalizer Curves
The equalizer curves adjusted by the user
can be stored as the user's curves in the
memory under 4 buttons [9].
Storing a User's Curve in Memory
1. Adjust an equalizer curve as desired.
(Refer to "Adjusting the Equalizer
Curve" on page 16.)
2. Press and hold one of (U1) to (U4) of
buttons [9] that you want to store the
equalizer curve for more than 2
seconds.
(The frame of the "USER 1— USER 4"
indicators [19] corresponding to the
pressed button [9] blinks during storing
and lights up after completion of
storing.)
|
¢
If an equalizer curve has already bee
stored under the button, the previous
memory ts cleared and the new
equalizer curve is stored in memory.
e
When a equalizer curve is stored, its
nuance control value is set to 0.
18
Recalling a User's Curve
The equalizer curves stored under buttons
[9] (user's curves) can be recalled as
required.
Press one of (U1) to (U4) of buttons [9] that
store the user's curves to be recalled.
(The display frame [19] of the selected
user's curve lights.)
Flat Curve Function
Press and hold one of (F1) to (F4) of
buttons [10] for more than 2 seconds.
Advertisement
Table of Contents
