Advertisement
HOW TO USE SERVICE MODE
Service mode function
'Submode No,
Function mode No.
Specifies how many times the aging cycle should be repeated.
C8: AGING
10
| AGING
CYCLE
TIME
How to set
* . . "
lights in the upper two digits. input a number from 7 to 99 into the last two
digits,
To specify data, press the BEST HITS key. The system beeps once, the display
stops blinking and remains fit.
Plays back 30 seconds of the first song on each of the total number of discs. |
20 | AGING (A)
Plays back 30 seconds of the first and the last songs on each of the total number
30 | AGING (B)
of dises.
Plays back all songs of all discs.
40 | AGING (C)
How to set
In this mode, either "AP-A," "AP-B" or "AP-C" blinks during standby. Aging will
start by pressing the BEST HIT key and closing the MAIN UNIT DOOR, During ag-
ing, the display alternately shows the song number being played back and either
"AP-A," "AP-B" or "AP-C." Aging will be interrupted, and the system returns to
the standby mode by pressing the CLEAR key during the aging mode,
i
Service mode function
'Submode No.
Function mode No.
Lights up all LEDs of the OPERATION SECTION (except illuminations),
C9: TEST
10 | LE.D, ALL
LIGHTING
Reads and displays the data of the switches on the commander.
20
| FUNCTION
sw.
READING
Checks if all LEDs of OPERATION SECTION (except ifiuminations) light properly,
30 | LED.
LIGHTING
CHECK
42
Advertisement
