WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data D25966 Breaker WALT declares that these products described under D25966 Technical Data are in compliance with: 2006/42/EC, EN62841- Voltage 1:2015 +A11:2022, EN IEC62841-2-6:2020 +A11:2020.
English c ) Keep children and bystanders away while operating For more information, please contact D WALT at the following a power tool. Distractions can cause you to lose control. address or refer to the back of the manual. The undersigned is responsible for compilation of the technical 2) Electrical Safety file and makes this declaration on behalf of D WALT.
English g ) If devices are provided for the connection of dust may contact hidden wiring or its own cord. Cutting extraction and collection facilities, ensure these are accessory contacting a “live” wire may make exposed metal connected and properly used. Use of dust collection parts of the power tool “live”...
Follow the fitting instructions supplied with good quality plugs. Intended Use Recommended fuse: 13 A. Using an Extension Cable Your D25966 is designed for professional demolition, chipping If an extension cable is required, use an approved 3–core and trenching applications in concrete, brick, stone and other masonry materials.
Page 10
English Hex Wrench Storage (Fig. A, B) Side Handles (Fig. A, D, E) CAUTION: ALWAYS operate the tool with the side When not in use the 5mm hex wrench should be stored in handle properly assembled. Hold tool with both the hex wrench retainer hands to maximize control.
English Service Indicator LED (Fig. A, G) Proper Hand Position (Fig. H) WARNING: To reduce the risk of serious personal injury, Your breaker has yellow service indicator LED 11 , to indicate ALWAYS use proper hand position as shown. when service is required. Refer to the table for more information on LED functionality.
WALT ToolConnect™ Tag Ready (Fig. J) Optional Accessory WARNING: Use only original fasteners. Longer screws increase the risk of electrical shock or damage to the tool. Your D25966 comes with mounting holes 10 and screws 16 for installing a D WALT ToolConnect™...
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg enduser.BE@SBDinc.com Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)