Disassembly Note; Assembly Notes - Panasonic RS-856 Service Manual

DISASSEMBLY NOTE
MECHANISM SECTION:
Wie
ee
eee
Remove the brake shaft (M54) from the brake guide (M4) and push the detection rod assembly (M35) up in the direction of arrow A.
Remove the mechanism unit while lifting it aslant as shown by arrow B. (shown in fig. A)
Detection rod assembly (M35)
Record
Brake guide (M4) Brake shaft (M54) Fig. A
ASSEMBLY NOTES
MAIN CIRCUIT BOARD SECTION:
When mounting the main circuit board, be sure to check that the record/playback select switch (S1) and record lever assembly
(record lever (M40) and record lever spring (M41)) are properly positioned. (shown in fig. A)
MECHANISM SECTION:
Set point A of the mechanism guide angle to angle A of the mechanism unit. (shown in fig. B)
Litt the left side of the mechanism.
Insert the brake shaft into the specified position of the brake guide, as shown in fig. A.
Push the detection rod assembly (M35) up in the direction of arrow A. (shown in fig. A)
Slide the mechanism unit in the direction of arrow C. (shown in fig. B)
At this time, make sure that point B of the detection rod assembly is inserted into the opening between the mechanism unit and
metal boss assembly (M2).
QAWVO
Detection rod!
assembly |
Point B | (M35)
Mechanism |
unit
Angle A
Point A
(G20)!
oe guide angle |