Editing A Setpoint File - GE GEK-113045B Manual

4 USER INTERFACE
The following example illustrates how to enter setpoints using the SPMPC program.
1. Select the Programming > Configuration menu item. The following dialog box prompts for the configura-
tion information.
2. For setpoints requiring numerical values (e.g. RS485 Min. Turnaround Time), change the value by clicking
the up/down arrows at the right side of the box. Alternately, you may click the mouse pointer anywhere
inside the setpoint value box to display a numerical keypad showing the OLD value, RANGE, and INCRE-
MENT of the setpoint value being modified.
3. For setpoints requiring non-numerical values (e.g. Motor Type), clicking anywhere inside the setpoint box
causes a selection menu to be displayed.
GE Multilin
Courtesy of store.ips.us
SPM Synchronous Motor Protection and Control

4.1.5 EDITING A SETPOINT FILE

Enter the new value by clicking on
the numerical keys
Click Accept to exit the keypad and
keep the new value
Click Cancel to exit the keypad and
keep the old value
4.1 SPMPC SOFTWARE
4-
4
5