Repeat Play - Sharp RP-7700H Operation Manual

_™@ Cue, review and pause
Cue and review cannot be used if the unit is programmed.
1 Load a disc and begin playback.
2 Press the PAUSE button to interrupt playback.
@ Press the PLAY button to resume playback from the same point.
3 Press the CUE button whilst in pause mode for audible fast
forward.
Press the REVIEW button whilst in pause mode for audible fast
reverse.
@ Cue and review proceeds at twice the normal playback speed
for about 2 seconds, and then increases to 15 times the
normal playback speed.
@ If the end of the disc is reached whilst cuing, "End" lights and
CD operation is paused. Press the REVIEW button for fast re-
verse or press the STOP/CLEAR button and stop CD operation.
4 Press the PLAY button to resume playback.
@ Repeat play
An entire disc, a single track, or a programmed sequence can be
continuously repeated.
@ To repeat an entire disc
1 Press the REPEAT button.
2 Press the PLAY button.
@ To repeat the whole disc from the current
track 7
Simply press the REPEAT button during playback.
@ To repeat a single track
1 Programme a single track.
2 Press the REPEAT button.
3 Press the PLAY button.
@ To repeat a programmed sequence
1 Programme a sequence of up to 20 tracks.
2 Press the REPEAT button.
3 Press the PLAY button.
@ To stop repeat play, press the REPEAT
button again.
[E] 14