Sharp QA1150 Operation Manual page 24

@ PC/VIDEO
To switch the PC/VIDEO mode selection to the PC setting, press and hold the MODE
SELECT button, then press the MODE ADJ ( V ) button.
To switch the PC/VIDEO mode selection to the VIDEO setting, press and hold the
MODE SELECT button, then press the MODE ADJ ( A ) button.
When you turn on the power or do the ALL RESET operation, the PC/VIDEO mode
selection is set to the PC setting.
NOTE
The COMP and PC/VIDEO mode settings can be changed from the remote control
unit, as well as using the buttons on the QA-1150.
22