575655
New contract creation and editing
Performs setting for each contract created at par. 27-6-1.
To display this screen, click the [New] button or [Edit] button at par. 27-6-1 Contract list creation.
Description of contact setting screen
Inputs and edits the name of the contract. (Within 20 characters of alphabet, numeric, and symbol)
Contract start and end dates setting. (Calendar is opened by pull-down menu. Key input is also pos-
sible.) After setting, the refrigerant systems which can be selected during this period at
by clicking the [Display] button of .
Refrigerant system setting and change
1. Select the contract system type.
2. Configure whether to use the electricity meter or not for registered contracts.
3. Select the objective adaptor (U10 USB Network Interface).
4. Select the refrigerant system range by pull-down menu. (Cannot be selected when all systems were
set.)
5. When the [Add] button is clicked, the refrigerant systems are displayed in the list at .
Deleting refrigerant system from setting
1. Select the refrigerant system to be deleted at the list of .
2. Click the [Del] button.
Redisplaying the refrigerant systems
1. Since the refrigerant systems which can be selected at
when the contract period was changed at , reset the refrigerant systems.
List of refrigerant systems set at the contract.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
5
259
are updated when [Display] is clicked
are updated