Bosch Sensortec | BME280 User Manual
Select the default firmware update file (*.fwu2) from the DD2.1 UI installation directory in the folder Firmware.
Click Flash.
Once firmware upgrade is complete, restart the application board, and DD2.1 UI.
3.2.2 For App 3.0 Board:
To upgrade the firmware of DD2.1 UI to match the current version, follow the steps below:
1. Click Menu -> Settings-> Firmware Upgrade. The following window appears:
© Bosch Sensortec GmbH 2023 | All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution,
as well as in the event of applications for industrial property rights
Figure 11 : Boot mode Detected
Figure 12 : Firmware upgrade completion
10 | 23
Document number: BST-BME280-DSxxx-yy