Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
Ensure the dispenser is on a reasonably flat, level floor before loading.
9
Ensure that all fittings are tight and secure.
9
Be aware that the paper cutting blades are sharp, handle with care.
9
DO NOT use the dispenser for any purpose other than that for which it is designed.
9
2. INTRODUCTION
Four roll dispenser accepts two rolls up to 300mm and two rolls up to 450mm. Easy to load paper rolls and masking tape. Wide
base for added stability. Automatically applies adhesive tape to edges of masking paper. Papers and tapes not included.
Model No: ............................................................MK63
Capacity: ............ 2 x 300mm & 2 x 450mm Paper Rolls
3.
ASSEMBLY
Assemble parts as per fig.1.
Item
Part Number
1
MK63-01
Main Frame
2
MK63-02
Wheel Frame
3
MK63-03
Bottom Frame (V - Shape)
4
MK63-04
Bottom Frame
5
MK63-05
Support Assembly 22"
6
MK63-06
Support Assembly 16"
7
MK63-07
Cutting Blade and Spring 22"
8
MK63-08
Cutting Blade and Spring 16"
" "
MK63-09-11
Wheel Assembly (contains
numbers: 09,10,11)
" "
MK63-12-14
Paper Roll Assembly (contains
numbers; 12,13.14)
" "
MK63-15-17
Cutting Blade Assembly
(contains numbers; 15,16,17)
" "
MK63-18-24
Tape Reel Assembly
" "
MK63-23-25
Fixing for Lower Frame
(contains item numbers ;
23,24,25)
© Jack Sealey Limited
SEALEY MASKING PAPER DISPENSER TREE, 2 X
300MM & 2 X 450MM ROLLS
MK63
MODEL NO:
Description
Original Language Version
fig.1
MK63 Issue 2 29/03/23