Table of Contents
Advertisement
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is
switched off and disconnected from the
electrical power supply before replacing
the lamp to avoid the possibility of
electric shock.
•
Let the oven cavity and the heating
elements cool down.
•
Switch off the electrical supply.
•
Remove the protective cover "A" (fig.
7.9).
B
•
Replace
the
with a new one suitable for high
temperatures
following specifications: 220-240 V,
50-60Hz and same power (check watt
power as stamped in the lamp itself) of
the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from
your fingers can cause premature failure. Always use a clean cloth or gloves.
•
Refit the protective cover.
Note: Oven lamp replacement is not covered by your guarantee.
The intended purpose of the lamp, fitted on this appliance, is to illuminate the oven cavity
and thus help the user to better monitor the food while cooking. This lamp is not suitable for
other usage (e.g. environments lighting).
This product contains a light source of energy efficiency class G.
STORAGE COMPARTMENT
The storage compartment is accessible through the pivoting panel (fig. 7.10).
Do not store flammable material in the oven or in the storage compartment.
CAUTION: To assure a correct air flow to the burner, make sure there is an open air
gap in the top area of the storage during operation of the gas oven.
Fig. 7.9b
A
halogen
lamp
(300°C)
having
C
"C"
the
Fig. 7.9
WRONG
A
CORRECT
45
45
Advertisement
Table of Contents
