GE TermiNet 300 Operator's Manual page 15

GEK-15209A
PRELIMINARY
OPERATING INSTRUCTIONS
FOR THE
MAGNETIC TAPE CASSETTE ACCESSORY (TCA)
INTRODUCTION
The Magnetic Tape Cassette Accessory (See Figure 1) is used with the TermiNet* 300
Printer to "Write" (record) or "Read" (playback) data on a magnetic tape cassette.
The data ••written" on the cassette can be from the Printer's keyboard or from a
remote source that is connected to the printer. Data "Read" from the cassette can
be printed locally by the Printer or transmitted to a remote device by the Printer.
NOTE
For convenience, the Magnetic Tape
Cassette Accessory will be referred
to as the TCA.
The TCA can be controlled locally or from a remote location
by
the use of control
codes. The use of control codes will be discussed later.
All of the following instructions should
be
read thoroughly. A thorough
knowledge
of the terms and procedure steps involved in each operation will maximize trouble-
free and efficient operation.
@Copyright General Electric Company, USA, 1972
~~Registered Trademark of the General Electric Co., USA 1