Disassembly Procedure - Panasonic SD-YD250 Manual

No.
1 Temp. sensor (Between tab (A); approx. 27k
25°C)
2 Temp. fuse (Between (B)-(C); 0
3 Heater (Between (D)-(E); approx. 25
4 Angle
5 Heater Case Ass'y
6 P.C. Board B Ass'y
7 Motor / White-Red:approx. 30
approx. 29

2. DISASSEMBLY PROCEDURE

Note:
The assembly procedure is the reverse of the disassembly procedure
2.1. Removal of PCB (A) and Solenoid
1. Remove the two screws on the front rear corner which secures
the control panel. (Fig.1)
Parts Name
)
/ White-Blue:
:
Fig.1
5