Observe the manufacturer's product data sheets and safety data sheets when
using preservative. These data sheets are not included within Rexroth's scope
of supply.
Apply a layer of grease onto the output seal area, before you apply the external
preservation. Use a lithium multi-purpose grease L-XBCHA3 (GB 7324-94) or
FAG Arcanol MULTI3 or Klüberplex BE 31-222. Thus preventing, that
preservative reaches to the output seal. For the output seal, refer to the spare
parts drawing, view "B" in appendix
D "Technical data / Drawings" of the material number-specific operating
instructions.
Use a brush to apply the preservative evenly onto the bright spots.
6.2.2 Maximum storage periods
The following storage conditions must be met to ensure a maximum storage period
of 12 months:
• Temperature -30 ... 60°C, relative air humidity of max. 70%
• Dry and dust-free
• Protected against rain, snow and sunlight
RE 79022-01-B/04.2020, General Operating Instructions HYDROTRAC GFT 8000 series 40, Bosch Rexroth AG
Transport and storage
25/70