Page 1
(LCD and plasma). Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Accessories Please confirm that only the following accessories are included.
Page 2
SPECIAL NOTES HT-SB200 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). USER-SERVICEABLE SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire.
Page 4
IMPORTANT SAFETY INSTRUCTIONS (continued) HT-SB200 18) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following...
(via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue- generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like).
Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this 4"...
Button Plastic shield Volume Up and Down Buttons Notes: ● Some models of SHARP TV may not be operable. ● SHARP TV remote will not work with HT-SB200 system. Reference page Sets the TV Input Select Press the power to “ON”...
Speaker preparation HT-SB200 Make sure to unplug the AC power cord before installing the speaker or changing the position. Select from three installation methods according to the preferred position. Using spikes You may choose from the two different spike lengths provided: 25 mm and 30 mm.
Page 11
● SHARP is not responsible for accidents resulting from improper installation. ■ Driving screws SHARP designed the speakers so you may hang them on the wall. Use proper screws (not supplied). See below for size and type. 1/8" (3.2 mm) 3/16"...
Page 12
Speaker preparation (continued) HT-SB200 Screw the wall mount angle to the wall as shown in the illustration. (Total screw is 8 pieces) Wall mount angle Wall surface Wall mount angle Wall surface Wall surface Note: Make sure all screws are fully tighten. (screws are not supplied) ■...
Placing the speaker Installation image: DVD player Place the speaker as shown. Notes: ● As the sound from the speaker is omni-directional, you can place the speaker anywhere you like. However, it is recommended to place it as close to the TV as possible. ●...
Place the antenna away from the speaker for better reception. Notes: ● To connect to TV, use either LINE IN 1 jacks or AUDIO LINE IN 2 jack only. ● Refer the operation manual of the equipment to be connected.
AC power connection After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then to the AC outlet. ■ Using with the AC/DC adaptor Plug the AC power cord into the AC/DC adaptor. Plug the AC/DC adaptor cable into the DC IN jack on the speaker.
Remote control (continued) HT-SB200 Caution: ● Do not use rechargeable battery (nickel-cadmium battery, etc.). ● Danger of explosion if battery is incorrectly replaced. ● Replace only with the same or equivalent type. ● Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Page 17
Auto power off and auto detect signal: The speaker will automatically power off after 1 minute of inactivity. The STAND-BY indicator turns orange. At this point, it will automatically power ON if it detects audio signal from connected equipment. -5 -4 ...
HT-SB200 Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. ■ General Symptom ● No sound is heard.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker.
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.