Sharp AQUOS 4T-80CJ1U Operation Manual page 52

>> On-Screen Display Menu
<<
Example
System Options (Continue)
Public Mode
5. On Setting Items
1. POWER ON FIXED
Selection Selection between "Variable" and "Fixed"
Default - (Variable)
In "Fixed setting, the power-off by the power key of the unit is invalidated and the image is kept being received.
Explanation
The power can be turned off by stopping the power supply from AC.
Limit in Setting None
Exception None
In "Variable" setting, the power operation is in wait for 1 sec and then turn off when the main power switch is
Remarks
off.
2. MAXIMUM VOLUME
Selection Adjustment from 0 to 100
Default 100
Explanation Sound volume can not be adjusted higher than the present value.
When the sound volume is set lower than 99, only figures are displayed and the sound volume bar is not
Limit in Setting
displayed.
Exception None
Remarks None
3. VOLUME FIXED
Selection Selection between "Variable","Fixed", "ACON (AC CTRL)" and "AC/RCON (AC/RC CTRL)"
Default (Variable)
Explanation FIXED: Fixed at the level adjusted for a fixed volume.
AC CTRL: Start-up at the level specified for a fixed volume at ACON.
AC/RC CTRL: Start-up at the level specified for a fixed volume at start.
Limit in Setting The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the setting
is made impossible. (Basically, the menu is not displayed.)
The following keys become invalid when set to "Fixed":
Sound volume Up/Down (VOL +/–) [for both remote
control and the unit]
Mute (MUTE)
Exception None
Remarks As for sound volume fixing and sound volume MAX level, the sound volume fixing has priority.
ENG 4-28