Page 1
Installation *MFL718845022201rev01* User Install Guide A Insert the stand base into the styrofoam groove as shown in the gure. B Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
Page 2
Check the orientation of the power cable and cable holder. Power plug Cable holder Power cable Hold the screen and secure the power plug. Secure the screen to the stand. A Check the position of the power plug on the back cover of the screen. A Insert the stand hook into the back cover groove and tighten while pushing the lower part, as shown in the gure.
Page 3
*MFL718019122304REV04* ART10* Disassembly Position the screen vertically. Push the top of the screen lightly in the Use a wedge or pull it with your hand direction of the arrow to disassemble to completely disassemble the cover. a part of the cover space.
Page 4
90° (mm) (kg) 27ART10AKPL 1068 ~ 1268 29.9 17.5 Power requirement / 19 V 4.0 A...