Functional Descriptions - Husqvarna HG 125 VS Original Instructions Manual

Model Number
Metal Grinding (Type 27)
Metal Grinding (Type 11)
Metal Grinding (Type 1)
Metal Cutting (Type 41/1A)
Concrete Surfacing
Concrete/Masonry Cutting
Sanding
Wire Brushing (Wheel)
Wire Brushing (Cup)
X = Tool is provided with attachments to perform this application.
O = Tool can use optional attachments to perform this application.
N = Tool is not capable of this application.
Accessory speed rating must be equal to or greater than the tool's speed rating. Do not exceed
the recommended wheel diameter.
Electronic Clutch:
The electronics in the power tool detects
situations where the wheel or accessory may
be at risk to bind. The electronics prevents
further rotation of the drive spindle by
switching the power tool off (it does not
prevent kickback). To resume operation, turn
on/off switch to the off position, then restart
tool.
Constant Response Circuitry:
Helps maintain near constant RPMs between
no-load and load conditions.
Soft Start:
Helps reduce stress on the motor that occurs
from a high torque start. Helps bring
accessory smoothly up to speed.
Automatic Restart Protection:
Helps prevent accidental startups after power
has been interrupted, e.g. the tool was
Do not use Type 11 abrasive (cup) wheels with this tool. This tool is not
designed for use with type 11 (cup) abrasive grinding wheels.

Functional Descriptions

Application
unplugged with the switch locked in the on
position. To resume operation, turn on/off
switch to the off position, then restart the
tool.
Overload Protection:
Helps protect tool from excessive heat that
may damage motor. If tool stops or slows
during operation, allow motor to cool for 30
seconds by running no-load. If the overload
protection stops the tool repeatedly,
excessive force is causing the tool to
overload. Stop excessive force and readjust
work piece to reduce force applied.
Variable Speed:
Allows the grinders RPM to be adjusted for
greater versatility to match needs of specific
applications.
-10-
HG 125 VS
X
N
N
O
O
O
O
X
O