Contents 1 Important 4 Use your Soundbar Safety Turn ON and OFF Care for your product Select Source Care of the environment Select Equalizer (EQ) Effect FCC information Adjust the Volume Help and support Factory Reset Bluetooth Operation USB Operation 2 Your Soundbar AUX / OPTICAL / HDMI ARC What’s in the Box...
1 Important Risk of short circuit or fire! • For identification and supply ratings, see the type plate at the back or bottom of the product. Read and understand all instructions • Before you connect the product to before you use your product. If damage the power outlet, ensure that the is caused by failure to follow instructions, power voltage matches the value...
Replace only with the same or Care for your product equivalent type. • Remove batteries if they are Use only microfiber cloth to clean the exhausted or if the remote control is product. not to be used for a long time. •...
Limited may void the user’s authority to help. operate the equipment. This device complies with part 15 of the Model number: TAB5706/37 FCC Rules. Operation is subject to the Trade name: PHILIPS following two conditions: (1) This device Responsible party: TPV USA Corp.
2 Your Soundbar Help and support For extensive online support, visit Congratulations on your purchase, and www.philips.com/support to: welcome to Philips! To fully benefit from • download the user manual and the the support that Philips offers, register quick start guide your Soundbar at •...
OPTICAL ] Solid white Main unit OPTICAL HDMI ARC ] Solid white HDMI ARC This section includes an overview of the main unit. Remote Control Sensor Built-in Subwoofer Connectors This section includes an overview of the connectors available on your Soundbar. +/- (Volume) 2 3 4 Increase or decrease volume.
Remote control This section includes an overview of the remote control. (Standby-On) Switch the Soundbar on or to standby. Source buttons AUX: Switch your audio source to the AUX connection (3.5mm jack). BT / Pair: Switch to Bluetooth mode. Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
• Remove the battery from the Replace the Remote Control remote control when not in use for Battery a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire. •...
Drill 2 parallel holes (diameter Wall mount 3-8mm each according to wall type) on the wall. The distance between the holes should be Note 646mm / 25.4". • Improper wall mounting may result in accident, » Secure the dowels and screws in injury or damage.
3 Connect • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. This section helps you connect your Using a High Speed HDMI cable, Soundbar to a TV and other devices, connect the HDMI ARC connector and then set it up.
Connect to AUX Socket Connect to Power a. Use a 3.5mm to 3.5mm audio cable • Before connecting the AC power • Use a 3.5mm to 3.5mm audio cable cord, ensure you have completed all (not included) to connect the TV’s other connections.
4 Use your Select Source Soundbar Press the button repeatedly on the unit or press the AUX, OPTICAL, HDMI ARC, BT/Pair, USB buttons This section helps you use the on the remote control to select the Soundbar to play audio from connected desired mode.
Vol- • Stadium (2 LEDs blink): Create an Adjust the built-in Subwoofer’s Mute Volume atmosphere as if watching a sports game in a stadium. +/- (subwoofer) to Press increase or decrease the built-in Subwoofer’s volume. Movie Music bass Voice Stadium bass Adjust the Volume Vol+...
Soundbar, on Bluetooth, search for and select such as wall, metallic casing that covers the Philips TAB5706 to start connection device, or other devices nearby that operate in (see the user manual of the the same frequency.
USB Operation AUX / OPTICAL / HDMI ARC Operation Enjoy audio on a USB storage device, such as an MP3 player and USB flash Ensure that the unit is connected to the memory, etc. TV or audio device. Insert the USB device. Press the button repeatedly on the unit or press the AUX, OPTICAL,...
If you enable the function. still have a problem, get support at • The device is not correctly www.philips.com/support. connected.Connect the device correctly. Main unit • The soundbar is already connected with another Bluetooth device.
• Aim the remote control directly at Trademarks: the sensor on the front of the unit. This is a 15 mins power off function, one of the ERPII The terms HDMI, HDMI High-Definition standard requirement for saving Multimedia Interface, and the HDMI power Logo are trademarks or registered trademarks of HDMI Licensing...
Page 20
Please visit www.philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N. V . and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited.