Table of Contents
Advertisement
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer
, the cooking time
U
the actual time
, press the
0
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.
Time
Once the oven has been connected or after a power cut, a
flashing
0
symbol and four zeros are shown on the display
panel. Set the time.
Press the
button.
0
1.
The display panel displays the time
Childproof lock
The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
When the heating type and temperature or grill level are
programmed, the childproof lock turns off the heating.
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
Basic settings
Time indicator
™‚
Duration of signal
™ƒ
after the cooking
time or the time set
on the timer has
elapsed
Time until a setting is
™„
applied
* Default setting
, the end time
r
sensor repeatedly until the
0
ƒ
.
‹‹
.
Selection
‚
Selection
ƒ
Selection
„
always*
only with
-
the
button
0
approx.
approx.
approx.
10 sec
2 min.*
5 min
approx.
approx.
approx.
2 sec
5 sec.*
10 sec.
Set the time with the buttons
2.
The programmed time is displayed after a few seconds.
Changing the time
No other time function can be programmed.
or
p
Press the
0
1.
The time symbols light up on the display panel, the brackets
are located next to
Adjust the time with the buttons
2.
The programmed time is displayed after a few seconds.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Activating the childproof lock
No cooking time or end time should already be set.
Press the
D
button for approximately four seconds.
The display panel shows the symbol
now activated.
Turning off the childproof lock
Press the
button for approximately four seconds.
D
The
D
symbol in the display panel goes off. The childproof
lock is now deactivated.
No other time function can be programmed.
Press the
0
1.
The display panel will show the current basic setting for the
time, e.g.
™‚
Set the basic setting using the buttons
2.
Confirm with the
3.
The display panel shows the following basic setting. Using
the button
0
make the setting.
Press the
0
4.
All basic settings have been applied.
The basic settings can be changed again at any time.
@
or
A
.
button four times.
.
0
or
@
A
. The childproof lock is
D
button for approximately 4 seconds.
for the Selection
‚
.
0
button.
select the levels and using the buttons
button for approximately 4 seconds.
.
or
.
@
A
or
@
A
9
Advertisement
Table of Contents
