Advertisement
en | 14 | 81 22 2 219 012
4
Operating Instructions
Only qualified personnel are allowed to use the Universal Jack.
1.
Inspect the Universal Jack before use, as described in Chapter 5, "Inspection and Maintenance". Do not use
the Universal Jack if damaged or in poor condition.
2.
Attach the necessary accessories onto the Universal Jack (see the BMW service and repair manual).
3.
Move the Universal Jack to the work site. Lock the three wheel brakes on the base frame of the Universal
Jack.
4.
Raise the piston by pressing the pedal several times.
WARNING
Danger from raising the piston too high!
The vehicle could be damaged or it could be lifted off of the lifting platform if the pistion is raised too high.
This could result in serious personal injury.
Raise the piston just until the accessory bears the weight of the vehicle part.
5.
Attach and secure the load onto the accessory (see the BMW service and repair manual).
WARNING
Danger of Falling Loads!
The load could fall if the accessories have not been attached to the Universal Jack correctly or if the load
has not been secured onto the accessory correctly. This could result in serious personal injury or severe
damage to materials. Off-centred loads could damage the Universal Jack.
Ensure that the accessory has been attached to the Universal Jack correctly.
Ensure that the load has been secured onto the accessory correctly.
Ensure that the load centre is placed in the middle of the Universal Jack.
6.
Remove the parts to be taken out of the vehicle (see the BMW service and repair manual).
7.
Lower the piston carefully by turning the knob counter-clockwise.
CAUTION
Lowering or rotating loads could cause personal injury!
Persons who are in the danger zone while the load is being lowered or rotated risk being injured.
Ensure that no one is in the danger zone while lowering or rotating the load.
Stay out from under loads.
12/2013
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Advertisement
