Wireless module................................. 83 Audio.....................................84 Storage....................................84 Power adapter................................... 85 GPU—Integrated................................85 Powering the system................................86 Type-C display settings..............................86 Dell power button sync..............................86 Data security..................................87 Computer environment..............................87 Energy Star and Trusted Platform Module (TPM)....................88 Smart power enablement..............................88 Contents...
Set up your OptiPlex 3090 Ultra Topics: • Installing the device on a fixed stand • Installing the device on a Pro 1 height-adjustable stand • Installing device on offset VESA mount • Installing the device on a Pro 2 height-adjustable stand •...
Page 6
6. Remove the screw that secures the stand mounting bracket to the stand. 7. Lift the mounting bracket to release the hooks on the bracket from the slots on the stand. Set up your OptiPlex 3090 Ultra...
Page 7
8. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet. 9. Align the screws on the mounting bracket with the screw holes on the monitor. 10. Tighten the four captive screws to secure the mounting bracket to the monitor. Set up your OptiPlex 3090 Ultra...
Page 8
11. Select the height at which you want to mount the monitor and align the hooks on the mounting bracket with the slots on the stand. 12. Replace the screw to secure the fixed stand to the monitor. Set up your OptiPlex 3090 Ultra...
Page 9
13. Align the vents on the device with the vents on the stand cover. 14. Lower the device in the stand until you hear a click. 15. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet. NOTE: To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image.
Page 10
NOTE: All the cables and ports are used depending on the peripherals chosen and the configuration of the computer. 16. Slide the back cover, along with the device, into the stand until you hear a click. Set up your OptiPlex 3090 Ultra...
Page 11
17. Lock the device and the stand cover. Set up your OptiPlex 3090 Ultra...
Page 12
18. Press the power button to turn on the device. Set up your OptiPlex 3090 Ultra...
Monitor tilt angle Installing the device on a Pro 1 height-adjustable stand 1. Align and insert the slots on the height-adjustable stand into the tab on the stand base. 2. Lift and tilt the stand base. 3. Tighten the captive screw to secure the stand to the base. Set up your OptiPlex 3090 Ultra...
Page 15
4. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet. 5. For installing the height-adjustable stand to the monitor: a. Align and insert the hooks on the mounting bracket on the stand into the slots on the monitor, until you hear a click. Set up your OptiPlex 3090 Ultra...
Page 16
6. For installing QR to VESA bracket for E-Series monitor: a. Align the screw holes on the QR to VESA bracket with the screw holes on the monitor. b. Install the four screw spacers and the screws to secure the QR to VESA bracket to the monitor. c.
Page 17
7. To release the stand cover, slide the release latch until you hear a click. 8. Slide and lift the cover to release it from the stand. 9. Align the vents on the device with the vents on the stand cover. 10.
Page 18
11. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet. NOTE: To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image. NOTE: All the cables and ports are used depending on the peripherals chosen and the configuration of the computer.
Page 19
12. Slide the back cover, along with the device, into the stand until you hear a click. Set up your OptiPlex 3090 Ultra...
Page 20
13. Lock the device and the stand cover. Set up your OptiPlex 3090 Ultra...
Page 21
14. Press the power button to turn on the device. Set up your OptiPlex 3090 Ultra...
Stand tilt, pivot, and swivel images Installing device on offset VESA mount 1. Align the screw holes on the device with the screw holes on the offset VESA mount. 2. Install the four screws to secure the device to the offset VESA mount. Set up your OptiPlex 3090 Ultra...
Page 24
3. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet. 4. Align the screw holes on the offset VESA mount with the screw holes on the monitor. 5. Install the four screw spacers and the screws to secure the offset VESA mount to the monitor. Set up your OptiPlex 3090 Ultra...
Page 25
6. Insert the hooks on the mounting bracket of the monitor arm stand into the slots on the offset VESA mount on the monitor. 7. Lower the monitor on the monitor arm stand until you hear a click. Set up your OptiPlex 3090 Ultra...
Page 26
8. To install the offset VESA mount on a Dell E-Series monitor: a. Align and install the four screws to secure the device to the offset VESA mount. Set up your OptiPlex 3090 Ultra...
Page 27
b. Remove the VESA cover from the back of the monitor and secure the offset VESA mount along with the device to the monitor. Set up your OptiPlex 3090 Ultra...
NOTE: While orienting the monitor horizontally, route the security lock cable to the right side of the device to avoid any impact to WLAN performance. Installing the device on a Pro 2 height-adjustable stand 1. Align and insert the slots on the height-adjustable stand into the tab on the stand base. 2.
Page 31
NOTE: For the large height adjustable stand, replacing the screw to the unlock icon screw hole in the stand base ensures the rotation of the 30-inch - 32-inch monitor. Set up your OptiPlex 3090 Ultra...
Page 32
4. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet. 5. For installing the height-adjustable stand to the monitor: a. Align and insert the hooks on the mounting bracket on the stand into the slots on the monitor, until you hear a click. Set up your OptiPlex 3090 Ultra...
Page 34
6. For installing QR to VESA bracket for E-Series monitor: a. Align the screw holes on the QR to VESA bracket with the screw holes on the monitor. b. Install the four screw spacers and the screws to secure the QR to VESA bracket to the monitor. c.
Page 36
7. To release the stand cover, press the button on the side of the stand chassis. 8. Slide and lift the cover to release it from the stand. Set up your OptiPlex 3090 Ultra...
Page 37
9. Slide and release the inner bar on the lower edge of the stand cover. Set up your OptiPlex 3090 Ultra...
Page 38
10. Align the vents on the device with the vents on the stand cover and slide the device in the cover. Set up your OptiPlex 3090 Ultra...
Page 39
11. Slide the inner bar back to the lower edge of the stand cover to lock the device to the cover. Set up your OptiPlex 3090 Ultra...
Page 40
12. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet. Set up your OptiPlex 3090 Ultra...
Page 41
13. To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image. NOTE: All the cables and ports are used depending on the peripherals chosen and the configuration of the computer. Standard Height Adjustable Stand Set up your OptiPlex 3090 Ultra...
Page 42
Large Height Adjustable Stand Set up your OptiPlex 3090 Ultra...
Page 43
14. Slide the stand cover, along with the device, into the stand until you hear a click. Set up your OptiPlex 3090 Ultra...
Page 44
15. Lock the device and the stand cover. Set up your OptiPlex 3090 Ultra...
Page 45
16. Press the power button to turn on the device. Set up your OptiPlex 3090 Ultra...
Installing device on Wall Mount 1. Full Function a. Press the release button to open the cable cover. b. Align the screw holes on the wall mount in the wall and mark them against the wall using a pencil. Set up your OptiPlex 3090 Ultra...
Page 50
c. Drill the screw marks on the wall and insert the three screw anchors into the screw holes in the wall. Set up your OptiPlex 3090 Ultra...
Page 51
d. Align the screw holes on the wall mount with the screw holes on the wall and install the three screws to secure the wall mount in the wall. Set up your OptiPlex 3090 Ultra...
Page 52
e. Align the screw holes on the device with the screw holes on the wall mount bracket. f. Install the four screws to secure the device to the wall mount bracket. Set up your OptiPlex 3090 Ultra...
Page 53
g. Insert the hooks on the mounting bracket of the wall mount into the slots on the wall mount bracket module. h. Align and insert the hooks on the wall mount bracket module into the slots on the wall mount until it clicks into place Set up your OptiPlex 3090 Ultra...
Page 54
Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet. Set up your OptiPlex 3090 Ultra...
Page 55
To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image. NOTE: All the cables and ports are used depending on the peripherals chosen and the configuration of the computer. Set up your OptiPlex 3090 Ultra...
Page 56
k. Close the stand cover. Set up your OptiPlex 3090 Ultra...
Page 57
Lock the device and the stand cover. Set up your OptiPlex 3090 Ultra...
Page 58
2. Simple Function a. Align the screw holes on the wall mount in the wall and mark them using a pencil. Set up your OptiPlex 3090 Ultra...
Page 59
b. Drill the screw marks on the wall and insert the two screws into the screw holes in the wall. Set up your OptiPlex 3090 Ultra...
Page 60
c. Align the screw holes on the device with the screw holes on the wall mount bracket. d. Install the four screws to secure the device to the wall mount bracket. Set up your OptiPlex 3090 Ultra...
Page 61
e. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet. Set up your OptiPlex 3090 Ultra...
Page 62
f. Align the screws on the wall with the retention clips on the wall mount bracket module. g. Mount the wall mount bracket module in the screws on the wall. Set up your OptiPlex 3090 Ultra...
Page 63
h. Press the power button to turn on the device. Set up your OptiPlex 3090 Ultra...
A message appears, indicating that all data in the USB flash drive will be deleted. 7. Click Create. 8. Click Finish. For more information about reinstalling Windows using the USB recovery drive, see the Troubleshooting section of your product's Service Manual at www.dell.com/support/manuals. Create a USB recovery drive for Windows...
View of OptiPlex 3090 Ultra Topics: • • Bottom • Left • Right • Front and back • Stands view • System board layout 1. Fan vent 2. Power button View of OptiPlex 3090 Ultra...
Bottom 1. DisplayPort 1.4 + + HBR2 2. 1 USB 3.2 Gen 2 Type-A ports with SmartPower On 3. 1 USB 3.2 Gen 2 Type-A ports with SmartPower On 4. RJ45 Ethernet port 5. DC-in port 6. 1 USB 3.2 Gen 2 Type-C port with Display Port Alt Mode/Power delivery View of OptiPlex 3090 Ultra...
Left 1. Headset/Universal Audio Jack 2. Fan vent 3. Hard-drive status LED 4. 1 USB 3.2 Gen 2 Type-A port 5. 1 USB 3.2 Gen 2 Type-A port with PowerShare View of OptiPlex 3090 Ultra...
Storage • Power adapter • GPU—Integrated • Powering the system • Type-C display settings • Dell power button sync • Data security • Computer environment • Energy Star and Trusted Platform Module (TPM) • Smart power enablement Dimensions and weight Table 1.
Processor The following table lists the details of the processors supported by your OptiPlex 3090 Ultra. Table 2. Processor Description Option one Option two Option three Option four Processor type Generation Intel Generation Intel Generation Intel Intel Celeron 6305 Core i3-1115G4 Core i3-1115G4E Core i5-1145G7 Processor wattage...
N-2 versions that are initially qualified for this platform. For future versions of Windows 10, Dell will continue to test the commercial platform with coming Windows 10 releases during device production and for five years post-production, including both fall and spring releases from Microsoft.
Power adapter The following table lists the power adapter specifications of your OptiPlex 3090 Ultra. Table 11. Power adapter specifications Description Values Type 65 W Connector dimensions: External diameter 4.50 mm Internal diameter 2.90 mm Input voltage 100 VAC-240 VAC Input frequency 50 Hz-60 Hz Input current (maximum)
Type-C display settings When using a Dell USB Type-C display to power on your OptiPlex 3090 Ultra, to avoid any power loss to the device when the display is turned off or on Standby mode, ensure that the Always on USB-C Charging setting on the display is enabled.
Optional Dell Data Guardian Optional Dell Data Protection | Bitlocker Manager (DDP | BLM) Optional Dell Data Protection | Endpoint Security Suite or Dell Endpoint Optional Security Suite Pro Dell Data Protection | Endpoint Security Suite Enterprise or Optional Dell Endpoint Security Suite Enterprise...
BIOS, the system will not power on or wake from hibernation when a key is pressed on the USB keyboard. Enable USB Wake support: 1. Press <F12> when the Dell logo appears to initiate a one-time boot menu. Go to BIOS Setup. 2. Select Power Management.
Page 89
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Go to Dell.com/support.