Table of Contents
Advertisement
Boot Menu
Boot Sequence specifies where the system boots from. Press Enter to open the sub
menu. The system boots from the drive at the top of the list. If the system cannot
find the drive, it will boot from the second one; then, third one. Use arrow keys to
select the drive you want to move; then, use minus key or space bar to move it up
and down.
USB FDD defines whether the system boots from the USB floppy disk drive.
LAN boot defines whether the system boots from other server via the LAN unit of
the computer.
Wake On LAN defines whether the system boots up or resumes from System
Hibernate when the LAN unit of the computer becomes active.
Exit Menu
Exit Saving Changes saves the settings you have changed and exits the Setup
Utility.
Exit Discarding Changes exits the Setup Utility without saving the settings you
have changed.
Load Setup Defaults returns the values of all items to the default. To exit, select
one of the above items.
Discard Changes returns the values of all items to the values you last saved. To
exit, select one of the above two items.
Save Changes saves the settings you have changed. To exit, select one of the
above two items.
6
6-7
Advertisement
Table of Contents
