23 OPERATION Before Use Loading the Dryer Control Panel Dry Cycles Cycle Modifiers Options and Extra Functions 32 SMART FUNCTIONS LG ThinQ Application Smart Diagnosis Function 33 MAINTENANCE Regular Cleaning 35 TROUBLESHOOTING FAQs Before Calling for Service 40 LIMITED WARRANTY...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety for a Dryer WARNING Fire Hazard Failure to follow safety warnings exactly could result in serious injury, death or property damage. Do not install a booster fan in the exhaust duct. •...
IMPORTANT SAFETY INSTRUCTIONS WARNING Risk of Fire Install the clothes dryer according to the manufacturer’s instructions and local codes. Clothes dryer installation must be performed by a qualified installer. • Do not install a clothes dryer with flexible plastic venting materials. If •...
Page 5
IMPORTANT SAFETY INSTRUCTIONS • The appliance must be installed and electrically grounded by qualified service personnel in accordance with local codes. • Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance. • When moving or installing the appliance in a different location, call qualified service personnel for installation and service.
Page 6
• Do not grasp the power cord or touch the appliance controls with wet hands. • Do not modify or extend the power cord. • If the appliance has been submerged, contact an LG Electronics customer information center for instructions before resuming use.
Page 7
IMPORTANT SAFETY INSTRUCTIONS • Do not put living animals such as pets inside the appliance. • Do not put any part of your body, such as your hands or feet, or metal objects under the appliance. • Do not let your hand get pinched when opening or closing the dryer door. Maintenance •...
PRODUCT OVERVIEW PRODUCT OVERVIEW Product Features The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Front View Control panel Lint filters Leveling feet Reversible door Rear View...
Page 9
PRODUCT OVERVIEW Exhaust duct oulet Product Specifications Model DL*610** Please refer to the rating label for detailed Electrical Requirements information. Dimensions (Width X Depth X Height) 27'' X 29 1/2'' X 44 1/2'' (68.6 cm X 75.0 cm X 113.0 cm) Maximum Depth with Door Open 50 1/4'' (127.5 cm) Gas : 114.0 lb (51.7 kg)
10 INSTALLATION INSTALLATION Before Installing Installation Overview Please read the following installation instructions first after purchasing this dryer or transporting it to another location. Choose the proper location. Level the appliance. Vent the appliance. Connect the gas dryer. Plug in the power cord. Installation test and test run.
INSTALLATION Choosing the Proper • For garage installation, you will need to place the appliance at least 18 inches (45.7 cm) above the Location floor. The standard pedestal height is 15 inches (38 cm). You will need 18 inches (45.7 cm) from the garage floor to the bottom of the appliance.
Page 12
12 INSTALLATION Dimensions and Clearances The following clearances are recommended for the appliance. • Additional clearances should be considered for ease of installation and servicing. • Additional clearances should be considered on all sides of the dryer to reduce noise transfer. Installation Spacing for Recessed Area or Closet Installation Description Dimension/Clearance...
Page 13
INSTALLATION NOTE • There should be at least a little space around the dryer (or any other appliance) to eliminate the transfer of vibration from one appliance to another. If there is enough vibration, it could cause appliances to make noise or come into contact, causing paint damage and further increasing noise. •...
14 INSTALLATION Leveling the Appliance NOTE • If you are installing the appliance on the optional WARNING pedestal, you must use the leveling feet on the • Use long-sleeved gloves and safety glasses. pedestal to level the appliance. The appliance leveling feet should be fully retracted.
INSTALLATION With the hinges and cover caps in the new locations, remount the inner door frame onto While supporting the door, remove the 2 the outer door frame with the screws screws on the door hinge, two from each removed in step 3 above. hinge.
Page 16
16 INSTALLATION NOTE • An adapter kit, part number 383EEL9001B, may be purchased from your LG retailer. This kit contains duct components necessary to change the appliance vent location. • Right-side venting is not available on gas models. Bottom Venting...
INSTALLATION Venting the Dryer Ductwork Maximum length No. of WARNING of 4-inch Wall Cap Type 90° • Gas dryers MUST exhaust to the outdoors. diameter rigid Elbows metal duct • To reduce the risk of fire, combustion, or accumulation of combustible gases, DO NOT Recommended 65 ft.
18 INSTALLATION • Incorrect or inadequate exhaust systems are not • This dryer must be plugged into a 120-VAC, 60- covered by the dryer warranty. Dryer failures or Hz. grounded outlet protected by a 15-ampere service required because of such exhaust fuse or circuit breaker.
INSTALLATION Connecting the Gas Supply Check all pipe connections (both internal and external) for gas leaks with a noncorrosive leak-detection fluid. NOTE • In the Commonwealth of Massachusetts: This product must be installed by a licensed plumber Proceed to Venting the Dryer. or gas fitter.
20 INSTALLATION Final Installation Check WARNING Once you have completed the installation of the • This appliance must be connected to a grounded dryer and it is in its final location, confirm proper metal, permanent wiring system, or an operation with the following tests. equipment-grounding conductor must be run with the circuit conductors and connected to the Test Dryer Heating...
Page 21
INSTALLATION performed to alert you to any serious problems in error codes. See the chart on the next page the exhaust system of your home. for error code details and solutions. • The Flow Sense LED indicates that the • Your appliance features Flow Sense , an innovative sensing system that automatically exhaust system is severely restricted.
Page 22
22 INSTALLATION Check for blockages and lint buildup. Possible Cause & Solution light Low or Temperature sensor failure. Mediu • Turn off the appliance and call for service. Energy Humidity sensor failure. Saver • Turn off the appliance and call for service.
OPERATION OPERATION Before Use WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Operation Overview Adjust Settings Default settings for the selected cycle can now be changed, if desired, using the cycle Clean the Lint Filter modifier and option buttons.
24 OPERATION Baby Clothes and Nightgowns Always ensure that the lint filter is properly installed before running the dryer. Running the • Always check the manufacturer’s instructions. dryer with a loose or missing lint filter will damage the dryer and articles in the dryer. Rubber and Plastics •...
Page 25
OPERATION Heat Setting Label Directions High Medium No Heat / Air...
26 OPERATION Control Panel Control Panel Features Power Button • Press the button to turn the appliance on. Press again to turn the appliance off. NOTE • Pressing the Power button during a cycle will cancel that cycle, and any load settings will be lost. Cycle Selector Knob •...
Page 27
OPERATION Cycle Status Indicators • Dry lights up when the appliance is in the drying stage. • Cool lights up when the appliance is in the cool down stage. Flow Sense Indicator • The Flow Sense™ duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer.
Sensor Dry Cycles Sensor dry cycles utilize LG's unique dual sensor system to detect and compare the moisture level in clothes and in the air and adjust the drying time as needed to ensure superior results. The appliance automatically sets the dryness level and temperature at the recommended setting for each cycle.
Page 29
OPERATION Manual Dry Cycles Cycle Air Dry Description Use this cycle to dry all items (such as plastics or rubber) that can be tumble dried without using heat. Dry Level Not adjustable Temperature Not adjustable Cycle 60 min / 40 min / 20 min Description Use this cycle to select a specific amount of drying time, temperature.
30 OPERATION Cycle Modifiers About Modifier Buttons Each cycle has default settings that are selected automatically. Customize these settings using the cycle modifier buttons. Repeatedly press the button for the desired modifier until the indicator light for the desired setting is lit. Not every option is available with every cycle.
OPERATION Options and Extra Functions 3) Press and hold the Temp. and Dry Level buttons for 3 seconds to activate/deactivate Your dryer includes several additional cycle this function. options to customize cycles to meet your individual needs. NOTE Select the desired option after selecting the •...
Using Audible Diagnosis to Diagnose Issues Follow the instructions below to use the audible diagnosis method. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application.
MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They will damage the finish. Regular Cleaning Cleaning the Lint Filter Always clean the lint from the filter after every Cleaning the Exterior cycle.
Page 34
34 MAINTENANCE filter in warm, soapy water and allow it to dry thoroughly before reinstalling. NOTE • NEVER operate the appliance without the lint filter in place.
Scan this QR code to quickly access the video search page on the offical LG website. On the lg.com/us home page, click on the Support menu tab to bring up the menu selections. Select Video Tutorials. Type Dryer in the search box on the new page and click the Search button.
36 TROUBLESHOOTING Before Calling for Service The dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the dryer does not function properly or does not function at all, check the following before you call for service.
Page 37
TROUBLESHOOTING Problem Possible Cause & Solution The appliance does House fuse is blown, circuit breaker has tripped, or power outage has occurred. not heat. • Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician.
Page 38
38 TROUBLESHOOTING Performance Problem Possible Cause & Solution Clothes are wrinkled. Clothes dried too long (overdried). • Overdrying a load of laundry can lead to wrinkled clothes. Try a shorter drying time or use a lower dry level setting and remove items while they still retain a slight amount of moisture.
Page 39
TROUBLESHOOTING Problem Possible Cause & Solution Clothes have damp Very large load or very small load. Single large item such as a blanket or comforter. spots after a Sensor • If items are too tightly packed or too sparse the sensor may have trouble reading the Dry cycle.
Period Scope of Warranty HOW SERVICE IS HANDLED One (1) year from the Parts and Labor (internal/ LG will provide parts and labor to repair or replace date of original retail functional parts only) defective parts. purchase Three (3) years from the Dryer Drum (Parts only) Parts only.
Page 41
Canada. If your Product is located outside a 150 the Product. Improper repair includes use of km radius from a ASC, as determined by LG parts not authorized or specified by LGECI. Canada, it will be your responsibility to bring the...
Page 42
Norelco Drive, North York, Ontario M9L 2X6. This first notify LG in writing at least 30 days in advance arbitration provision is governed by your of initiating the arbitration by sending a letter to...
Page 43
Limited Warranty and any disputes between finds either the substance of your claim or the you and LG except to the extent that such law is relief sought in the demand is frivolous or brought preempted by or inconsistent with applicable for an improper purpose (as measured by the federal or provincial/territorial law.
Page 44
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...