12
USING THE MONITOR SET
Customizing Settings
Menu Settings
Press MENU button on the bottom of the Monitor set to
1
display the MENU OSD.
Set the options by pressing the ◄ or ► or ▼ buttons.
2
Select the "
3
NEXT MENU
settings.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use
the up arrow (
) button.
Each option is explained below.
Menu
Analog Digital
●
BRIGHTNESS
●
CONTRAST
WIDE/ORIGINAL
●
●
RESET
MENU-->NEXT MENU
PICTURE
SHARPNESS
GAMMA
COLOR
COLOR TEMP
HORIZONTAL
DISPLAY
VERTICAL
CLOCK
PHASE
LANGUAGE
OTHERS
POWER INDICATOR
WHITE BALANCE
y
Analog: D-SUB(Analog signal) input.
y
Digital: DVI-D(Digital signal) input.
All manuals and user guides at all-guides.com
" button to enter the more option
●
To adjust the brightness of the screen.
●
To adjust the contrast of the screen.
WIDE
Switch to full screen mode according to input image signal.
●
ORIGINAL
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor
set ratio (16:9).
●
Restore all factory default settings . Press the
Analog Digital
●
●
To adjust the sharpness of the screen
●
●
To customize the color of the screen
●
To adjust the position of the screen
●
To improve the clarity and stability of the screen
●
●
To customize the screen status for a user's operating
●
environment
MENU
BRIGHTNESS
CONTRAST
WIDE / ORIGINAL
RESET
R
>
MENU
A
SHARPNESS
Description
,
Description
1 / 2
WIDE
NO
1 / 2
NEXT MENU
EXIT
>
NEXT MENU
PICTURE
buttons to reset immediately.
5
EXIT