Symbols; Designations - Bosch 70 Series Instruction Manual

Table 2: Hazard classes as defined in AnSI Z535.6
warning sign, signal word
DAnGER
wARnInG
CAUTIOn
NOTICE

1.3.2 Symbols

The following symbols indicate information that is not directly relevant to safety but
increases understanding of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used or operated
to its full potential.
▶ Single, independent step
1.
Numbered instruction:
The numbers indicate that the steps must be completed one after the other.
2.
3.

1.3.3 Designations

This documentation uses the following designations:
Table 4: Designations
Designation Meaning
A2FM Axial piston fixed motor in standard design, open and closed circuits
A2FE Axial piston fixed motor in plug-in design, open and closed circuits
Threaded plug Metal screw, pressure-resistant
Protection plug Made out of plastic, not pressure-resistant, only for transportation
As a generic term for the "axial piston fixed motor A2FM" and "axial piston plug-in
motor A2FE", the designation "axial piston unit" will be used from now on.
About this documentation
Meaning
Indicates a hazardous situation that, if not avoided, will
result in death or serious injury.
Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
Property damage: The product or the environment could be
damaged.
RE 91071-01-B/03.2015, A2FM/A2FE Series 70, Bosch Rexroth AG
7/52