2.
Insert USB memory or SD card into the ACP BACnet. (Refer to software update and data
backup)
3.
Press [SET] button of the ACP BACnet.
4.
Select [Function] menu, and press [SET] button.
5.
Select [DB recover] menu, and press [SET] button again.
6.
Select [USB] or [SD card], and press [SET] button.
7.
Remove the USB memory or SD card after completing the data recovery.
• ACP BACnet is automatically restarted for data recovery.
PQNFB17C0
Caution
Before data recovery is completed, turning off the power of the ACP BACnet or removing USB
memory or SD card may cause damage to the ACP BACnet.
Network Info
Contents
>
Function
Register FD
Click
[SET]
button
S/W update
DB back up
>
DB recover
Click
[SET]
button
>
USB
SD card
Click
[SET]
button
Automatic restart
of ACP BACnet
INSTALLING ACP BACnet
[Function 1/2]
[DB recover]
[Completed]
Remove USB
or SD card
[Completed]
Auto Restart
43