nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
9. DISASSEMBLY INSTRUCTIONS
It is not allowed to open the unit more than once,
otherwise the unit is not splash proofed any more and
has to be sent to the appropriate
service supplier with higher service level. Always use
new screws for assembly.
2.) Remove the Keymat.
4.) Unscrew the four, Torx Plus
shown order.
Always use new screws when re-
assembling! For assembly, reverse the order and use a
Torx Plus
size 6 driver with a torque setting of
®
32Ncm.
6.) Separate the UI-Module Assy from Engine Module
carefully, because of the board-to board-connector.
Service Manual 5140/5140i Level 1&2
Attention!
size 6 screws in the
®
PAGE 12 (23)
CONFIDENTIAL
1.) Press the grip markings on both sides of the B-Shell
and remove B-Shell.
3.) Remove the A-Shell.
5.) Take away the UI Module Assy with Engine Module.
7.) Push out the LCD by using a clean cloth.
Copyright © 2004-2005 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
14.7.2005