9. You can listen to TV sound through HTS speaker
automatically when TV is turned on. TV and HTS
should be connected with optical cable.
Press
to move and press
/
to select [On] or
[Off ]. Select [Next] and press ENTER ( ).
10. Check all the settings that you have set in the
previous steps.
Press ENTER ( ) while [Finish] is highlighted to fi n-
ish the initial setup settings. If there is any settings to
1
be changed, use
/ / /
to select
and press
ENTER ( ).
11. Displays private sound mode guide.
Press ENTER ( ).
1-6