Brother MFC-B7720DN Quick Start Manual

MFC-B7720DN / MFC-B7700D / DCP-B7535DW /
DCP-B7530DN / DCP-B7520DW / DCP-B7500D
Quick Setup Guide
Operation Videos
www.95105369.com
Installation
& Using
Videos
1
Remove the packing materials and install the drum unit and toner cartridge assembly
2
Load paper in the paper tray
3
Connect telephone line and power cord, and turn the machine on.
Connect telephone line and handset cord
(Only for MFC-B7220DN/MFC-B7700D)
Unpack the machine and check the components
Drum Unit
Handset, Handset Cord and
Phone Line Cord
(For MFC-B7720DN/MFC-B7700D)
Brother Installation Disc
1
Remove the orange part.
Adjust the paper
guides.
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
NOTE:
• The available connection interfaces vary depending on the model.
• Use the appropriate interface cable for the connection you want to
use. (Network cable is not a standard accessory.)
Inbox Toner Cartridge
• The illustrations in this Quick Setup Guide show the
USB Interface Cable
MFC-B7720DN.
Secure Network Access
Your machine's default password is on the label on
the back of the machine (preceded by "Pwd").
We strongly recommend you change it to protect
Quick Setup Guide
your machine from unauthorised access.
Product Safety Guide
2
1
Push firmly.
Do not exceed this mark.
Load the paper in the tray with
the printing surface down.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair
cable.
CHN-ENG
Version C
1