Part Names and Functions
a
b c d e
f
a Lens mount cap
The lens mount of the camera is covered using a cap
to protect it. Remove the lens cap covering the lens.
All manuals and user guides at all-guides.com
b Flange-back adjustment ring
c Camera installation bracket
d Lens iris output connector (LENS)
e Setup menu control buttons
f Power input terminal
g
g Video output connector (BNC type)
h
h Power indicator
The bracket can be fixed at the top or bottom of the
camera.
This 4- pin connector is used to send the Iris control
signal and power supply to an auto-iris type lens.
Use these buttons to set the menu options.
Supplies DC 12 V only from an external power source.
Supplies analog video signal (composite) to the
connected device such as a DVR or monitor.
Lights when the camera is powered.
9