Manual Operation (Without Remote) - Bosch RAC 2,6-2 IBW Owner's Manual

Manual Operation (Without Remote)

Press the SLEEP button when you are ready to go to sleep. When in
COOL mode, the unit will increase the temperature by 1°C after 1 hour,
and will increase by an additional 1°C after another hour. When in HEAT
mode, the unit will decrease the temperature by 1°C after 1 hour, and
will decrease by an additional 1°C after another hour.
It will hold the new temperature for 5 hours, then the unit will turn off
automatically.
NOTE:
The SLEEP function is not available in FAN or DRY mode.
SLEEP Operation
+/- 1°C
Set
temperature 1 hr
Saving energy during sleep
Fig. 4.
6
+/- 1°C
7 hours
1 hr timer off
3 Manual Operation (Without Remote)
How to operate your unit without the remote control
In the event that your remote control fails to work, your unit can be
operated manually with the MANUAL CONTROL button located on
the indoor unit. Note that manual operation is not a long-term solution,
and that operating the unit with your remote control is strongly
recommended.
BEFORE MANUAL OPERATION
Unit must be turned off before manual operation.
To operate your unit manually:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on the right-hand side of the
unit.
3. Press the MANUAL CONTROL button one time to activate FORCED
AUTO mode.
4. Press the MANUAL CONTROL button again to activate FORCED
COOLING mode.
5. Press the MANUAL CONTROL button a third time to turn the unit
off.
6. Close the front panel.
CAUTION
The manual button is intended for testing purposes and emergency
operation only. Please do not use this function unless the remote control
is lost, unless absolutely necessary. To restore regular operation, use the
remote control to activate the unit.
Fig. 5.
Climate 5000 – 6720886922 (2019/12)
Manual control button