Haier Ampac ZoneSense PLUS Operation Instructions Manual page 13

Agent
Press Enter then Move Left or Move Right to select the Agent OR press Move right to access
Sounders. The LCD indicates the Agent Release Board status / release progress.
Sounders
Press Enter then Move Left or Move Right to select the required Sounder (1–8). OR Press Move
right to access Voltage. The LCD indicates if the selected Sounder Board output is;
Off and Normal, or Off and in Fault, or On and Normal, or On and in Fault, or Isolated and Normal, or
Isolated and in Fault.
Inputs
Press Enter then Move Right or Move Left to view the status of each input (1 to 16) on the Input
Board.
Voltage
Press kMove right to access Software OR press Enter and the Battery Voltage will be displayed,
pressingMove Right will display the Charger Voltage (27.2volts ), pressing Move Right again will
display the System Voltage.
AGENT
NORMAL
Sample Agent Normal, Isolated Release in Stage 1 Screens
SOUNDER 2
ON / NOR
Sample Sounder Screens
INPUT 1
OFF / NOR
Sample Input Screens
BATT V
27.2V
Voltage Screens
AGENT
ISOLATED
SOUNDER 8
OFF / NOR
CHRGR V
27.2V
MAN1564-3
AGENT
STG 1 FB
SOUNDER 7
OFF / FLT
SYSTEM V
27.2V
13