Husqvarna 1-10DS Operator's Manual page 32

*special operations
Extension cables
Cable length
Calculated at a pre-fuse GG
> 20 m/66 ft
20 m/66 ft > 50 m/146 ft
50 m/164 ft > 75 m/246 ft
1
The cross sections must be re-calculated when other type or dimension pre-fuse are used than is given.
Extension cables
Cable length
Calculated at a pre-fuse GG
> 20 m/66 ft
20 m/66 ft > 50 m/164 ft
50 m/164 ft > 75 m/246 ft
1
The cross sections must be re-calculated when other type or dimension pre-fuse are used than is given.
Noise and vibration declaration
statement
These declared values were obtained by laboratory
type testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
32
High carbon steel shot
1
:
1
:
Cross section @240V Cable SOOW (600V)
≤ 15 A ≤ 30 A
15 amp 30 amp
AWG12 AWG8
AWG10 AWG8
AWG8 AWG6
Cross section @480V Cable SOOW (600V)
≤ 15 A ≤ 30 A
15 amp 30 amp
AWG14 AWG8
AWG12 AWG8
AWG12 AWG8
values are not suitable for use in risk assessments
and values measured in individual work places may
be higher. The actual exposure values and risk of
harm experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
High carbon steel grit
≤ 60 A ≤ 100 A
60 amp 100 amp
AWG4 AWG2
AWG4 AWG2
AWG2 AWG2
≤ 60 A ≤ 100 A
60 amp 100 amp
AWG4 AWG2
AWG4 AWG2
AWG4 AWG2
2070 - 003 - 16.03.2023