Husqvarna 1-10DPS75 Operator's Manual page 28

Hide thumbs Also See for 1-10DPS75:
Table of Contents

Advertisement

Available languages

Available languages

Noise and vibration declaration
statement
These declared values were obtained by laboratory
type testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
Approved abrasive
Approved abrasive
in./mm
*special operations
Extension cables
Cable length
Calculated at a pre-fuse GG
> 66 ft
66 ft > 164 ft
164 ft > 246 ft
Cable length
Calculated at a pre-fuse GG
> 66 ft
66 ft > 164 ft
164 ft > 246 ft
1
The cross sections must be re-calculated when other type or dimension pre-fuse are used than is given.
2
The cross sections must be re-calculated when other type or dimension pre-fuse are used than is given.
28
High carbon steel shot
S-330
0.04/1.0
1
:
2
:
values are not suitable for use in risk assessments
and values measured in individual work places may
be higher. The actual exposure values and risk of
harm experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
S-390
0.05/1.2
Cross section @240V Cable SOOW (600V)
≤ 15 A
≤ 30 A
15 amp
30 amp
AWG12
AWG8
AWG10
AWG8
AWG8
AWG6
Cross section @480V Cable SOOW (600V)
≤ 15 A
≤ 30 A
15 amp
30 amp
AWG14
AWG8
AWG12
AWG8
AWG12
AWG8
High carbon steel grit
S-460*
0.06/1.4
≤ 60 A
60 amp
AWG4
AWG4
AWG2
≤ 60 A
60 amp
AWG4
AWG4
AWG4
2014 - 001 - 07.02.2023
SG25*
0.04/1.0
≤ 100 A
100 amp
AWG2
AWG2
AWG2
≤ 100 A
100 amp
AWG2
AWG2
AWG2

Advertisement

Table of Contents
loading

Table of Contents