Bosch 0 601 9C3 300 Original Instructions Manual page 19

Do not clean the vacuum cleaner by spraying a jet of
u
water directly at it. Water entering the top of the va-
cuum cleaner will increase the risk of electric shock.
Connect the dust extractor to a properly earthed
u
power supply system. The plug socket and extension
cable must have a fully functioning protective conductor.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may provide you with important in-
formation pertaining to the use of your dust extractor. Please
take note of these symbols and their meaning. Knowing what
these symbols mean will help you to use your extractor more
effectively and more safely.
Symbols and their meaning
WARNING! Read all the safety and gen-
eral instructions. Failure to observe the
safety and general instructions may res-
ult in electric shock, fire and/or serious
injury.
Dust extractor from dust class M in ac-
cordance with IEC/EN 60335-2-69 for
the dry extraction of harmful dusts with
an exposure limit of ≥ 0.1 mg/m³
WARNING! The dust extractor contains
dust particles that pose a risk to
health. Emptying and maintenance
procedures, including the disposal of
dust containers, should only be carried
out by professionals. Suitable protect-
ive equipment is required. Do not oper-
ate the dust extractor unless the com-
plete filter system is correctly inser-
ted. Otherwise, you are putting your
health at risk.
You can attach an L-Boxx to the top part
of the dust extractor for transporting the
extractor and to provide space-saving
Bosch Power Tools
Symbols and their meaning
storage for extractor accessories and/or
the power tool.
Do not use the dust extractor with an
L-Boxx attached. This will raise the dust
extractor's centre of gravity. The ex-
tractor may tip over. There is a risk of in-
jury and damage if you do this.
Only attach a maximum of one L-Boxx.
The weight of the L-BOXX along with its
contents must not exceed 15 kg.
Do not hang the dust extractor on a
crane hook, e.g. in order to transport
it. The dust extractor is not suitable for
moving with a crane. There is a risk of in-
jury and damage if you do this.
Do not sit or stand on the dust ex-
tractor. The dust extractor may tip over
and become damaged if you do this. This
poses a risk of injury.
Automatic start/stop
Extracting dust that accumulates from
working power tools.
The dust extractor switches on automat-
ically and off again with a time delay.
Switching Off
Extraction
Extracting dust deposits
15 Volume flow monitoring for a hose dia-
meter of 15 mm
22 Volume flow monitoring for a hose dia-
meter of 22 mm
35 Volume flow monitoring for a hose dia-
meter of 35 mm
Min/Max Continuous regulation of suction power:
English | 19
1 609 92A 7Z9 | (15.02.2023)