TeamPoS 3000 XT
6. Route the cable on the back of the
power supply.
7. Tilt the LCD back and open the
access panel to the I/O panel.
Connect the cable to the 12V USB
port on the I/O panel.
8. Replace the access panel for the I/O panel.
9. Replace the power supply panel.
10. Replace the chassis cover plate.
11. When all peripherals and options have been installed, connect the power cord.
5.2. Installing Peripherals
The TeamPoS 3000 XT features an interface panel (see Figure 5-6) where peripherals may be
connected. It includes the following connectors:
• VGA
• Two COM ports
• Four 5V USB ports
• Two 12V powered USB ports
• One 24V powered USB port
• One LAN connector.
5-8
Installation and Maintenance Manual
Connect
to
12V USB
D900000172