Step 2.
Install the riser card and secure it to the bracket.
Figure 127. Riser card installation
1. Align the screw holes in the riser card with the corresponding ones in the bracket.
2. Install the two screws to secure the riser card to the bracket
Step 3.
If necessary, reinstall the PCIe adapters on the riser card. See "Install a PCIe adapter" on page 175.
Then, refer to your note to reconnect any cables of the PCIe adapters on the riser card. Or you can
refer to the Chapter 3 "Internal cable routing" on page 55 and locate the cable routing information
for your configuration options.
ThinkSystem SR630 V2 Maintenance Manual
202