Advertisement
Controller Installation
Controller Dimension:
Set controller as sub
① Tap on menu icon in main interface→SETTING→GENERAL
② Setting "Main/Sub Set" function�
③ MAIN: This controller is main, and you can use this controller to set and view unit
parameters�
SUB: This controller is sub, and you can only use this controller to view the unit
parameters, not to control the unit operation status�
Installation settings
① Tap on menu icon
② Enter the correct password (841226), go into the installation interface� Please refer to the
installation manual of the indoor unit for specific operation methods.
Please refer to the installation manual of the indoor unit for specific operation methods.
133
in main interface → SETTING → INSTALLATION
5
17
Advertisement
