Bosch KIV87NFF0/04 Manual page 127

Repair
4.10 Replacing LED freezer lamp
Required tools:
Auxiliary tool For disassembly of plastic parts, "ma-
gic tool"
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service or authorised techni-
cians only!
Danger
Risk of electric shock due to live parts!
Danger to life through electric shock in case of improper repair
▶ Electric parts should be repaired by a qualified electricians.
▶ After the repair have a safety test according VDE 0701 or country-
specific regulations performed.
Danger
Risk of electric shock due to live parts!
Death by electrocution
▶ Disconnect appliances from electrical supply at least 60 seconds
before starting repairs.
Caution
Sharp edges!
Cut injuries
▶ Wear protective gloves.
Prerequisite:
Appliance is disconnected from power supply.
Door is open.
2023-04-18_9001628069
4.10.1 Removing LED freezer lamp
▶ 1. Slide disassembly tool between lamp and housing at the side of lamp to create
gap (1).
[00342180]
2. Slide disassembly tool on the other side of lamp fixation hook and rotate it for-
ward (2).
3. Remove LED freezer lamp (3).
LED freezer lamp is disconnected.
LED freezer lamp is removed.
4.10.2 Installing LED freezer lamp
Install in reverse order.
▶
Copyright by BSH Hausgeräte GmbH Page 127 of 505