Closing the Screen
1.
Close and latch the screen
Figure 63
1. Ball pin
2.
Insert the ball pin through the screen latch.
Tilting the Seat
1.
Unlatch the seat base (A of
2.
Tilt the seat and base open (B of
3.
Support it with the prop rods (C of
Figure 64
Lowering the Seat
1.
Rotate the seat slightly, and lift the front prop rod
out of the dent of the seat-support slot.
2.
Carefully lower the seat until it latches securely.
(Figure
63).
g378174
2. Screen latch
Figure
64).
Figure
64).
Figure
64).
g419565
Jacking Point Locations
Note:
Support the machine with jack stands
whenever you work under the machine.
Use the following as machine-lift points:
1. Front of the machine
2. Jack brackets (front-axle
tube)
•
Front—the jack brackets of the front-axle tube
(Figure
65).
•
Rear—the rear-axle tube.
45
Figure 65
3. Rear-axle tube
4. Back of the machine
g375763