Major Operating Controls And Their Functions; I External View - Panasonic BM-ET200 Operating Instructions Manual

Major Operating Controls and Their Functions

I External View

q Distance indicator
When a user comes within 50 cm {1.64 ft.} of the front of
an iris reader, this indicator will light up for guidance.
Adjust your eye position by following the distance indi-
cator or voice guidance from the speaker. This indicator
consists of five lamps. When a user comes to the posi-
tion that is most suitable for capturing, all the five lamps
light up.
w Front panel
Eye image capturing cameras and a near-infrared light
are located behind this panel. Depending on the user,
the near-infrared light (blinking red light) can be seen.
Notes:
• Avoid covering the front panel with a hand or cloth,
etc. That may cause invalid enrollment/recognition.
• Avoid pinching objects between the front panel and
the main unit. That may cause a malfunction.
e Mirror
This mirror is used for eye positioning at the time of iris
data enrollment/recognition. View the mirror from the
front side where you can position both eyes in the mir-
ror.
r Eye image capturing cameras
These cameras, which are located behind the mirror,
are used for eye image capturing.
Note: Avoid covering the mirror with a hand or cloth,
etc. Or avoid placing smudges on these cameras. It
may cause invalid enrollment/recognition.
t Audio volume controller
This controller adjusts the audio level of voice guid-
ance. For adjustment, use a Phillips screwdriver that is
3 mm {0.12 in.} in diameter and more than 25 mm
{0.98 in.} long. It is recommended to use a non-conduc-
tive driver.
Note: Avoid adding excessive force to the screwdriver.
That may damage the audio volume controller.
y Option camera (Model No.: BM-ETC202 Not sup-
plied)
This option camera, which is to be located behind the
front cover, is used for facial monitoring. If you connect
this camera to external equipment such as a digital disk
recorder, you can capture user's face and surroundings
to check the capturing condition.
u Speaker
This speaker outputs voice guidance that guides a
user's position and gives the recognition result. The
voice guidance can be set to any of the following by
performing the setup using the administration software,
web browser, or numeric key. Refer to system adminis-
trators for details on the settings.
w
e
r
t
Mute: Voice guidance is not output.
Simple: Recognition result are output. Voice guidance
is not output.
Full: Voice guidance and recognition result are output.
i Result indicators
These indicators inform you of recognition results.
ACCEPT: This indicator lights up when recognition is
successfully completed.
REJECT: This indicator lights up when recognition is
not successfully completed or the user's iris data is
not enrolled in the iris reader.
o Tilt handles
You can adjust the angle of the front panel by holding
these handles. Adjust the handles so as to position both
eyes at the center of the mirror.
!0 Live indicator
This indicator is blinking during standby. By performing
the setup using the administration software, web brows-
er, the indicator can be set to be continuously on or off.
Refer to system administrators for details on the set-
tings.
!1 Front cover
This cover is removed at the time of installation, con-
nection or maintenance. Users should not open it.
(Refer to service personnel when the front cover needs
to be opened.)
q
!0
o
i
u
y
!1
!2
15