Options
204
3
a) Align the network card into the cutout in the front
bracket.
b) Insert the network card into the network card
connector.
c) Secure the network card to the front bracket using
the two screws you removed from the slot cover.
Network card
[The figure is Ethernet
(KX-PNBC5) network card.]
a
c
4
Replace the printer controller board in the printer.
For instructions, see "Removing and replacing the printer controller
board" on
page
5
Connect the printer to a network.
For instructions, see
Network".
b
193.
"Chapter 3
Connecting the Printer to a