Vcr Playback; Basic Playback; Common Output - Panasonic AG-VP300 Operating Instructions Manual

Dvd player/video cassette recorder
Table of Contents

Advertisement

VCR/DVD/TV
VCR/
DVD
TV
VCR
VCR/DVD
VCR/DVD REC CHECK
OUTPUT
OUTPUT
1
2
4
5
7
8
0
AV
INDEX/SKIP
NAVI
TOP MENU
DIRECT
NAVIGATOR
3, 4, 2, 1
ENTER
DISPLAY
PROG/CHECK
TIMER
CANCEL/RESET
SUBTITLE
MUSIC w/ PICTURE
A.SRD
SEARCH
PICTURE
PLAY MODE
REPEAT
To Switch to the Desired Video

(Common Output)

This unit allows both video cassette and DVD discs to be played back.
You can set the unit so that the output is automatically switched to
the device which starts playback.
Operations
1
Press [MENU] to show the VCR MENU.
2
Select "OPTION" by
pressing [Cursor]34 and
then press [ENTER].
3
Select "OUT1[VCR/DVD]" by
pressing [Cursor]34.
4
Select "VCR", "MANUAL" or
"AUTO" by pressing
[Cursor]2 1.
VCR: Only VCR outputs
≥Even if you press [VCR/DVD OUTPUT],
the DVD video is not shown.
MANUAL: When the VCR output and
DVD output are manually
switched
≥Press [VCR/DVD OUTPUT] to switch
to the desired video source.
≥Each press of [VCR/DVD OUTPUT]
alternately switches between VCR and DVD.
≥They are not switched automatically.
AUTO: Initially set at this position
≥VCR and DVD are automatically switched depending on the
manipulation or the unit operation.
≥You may also switch them by pressing [VCR/DVD OUTPUT].
To make the on screen display disappear
Press [MENU] twice.
Note:
≥You can switch to the desired video with the above operation only when
the video from this unit is viewed through the OUT1 (VCR/DVD) terminal.
≥Depending on the operation, the desired output may not be
switched automatically even if "AUTO" is selected. In this case,
press [VCR/DVD OUTPUT] to switch it manually.

VCR Playback

TV
VCR
DVD
VCR/TV/DVD
REC
TRACKING/V-LOCK
3
CH
6
VOLUME
9
100
SLOW/SEARCH
MENU
MENU
PLAY
LIST
ENTER
RETURN
JET REW
QUICK REPLAY
JET REW
AUDIO
ANGLE
CINEMA
POSITION MEMORY
SPEED
VCR/TV
VCR/TV
A-B REPEAT
SET UP
On Screen Display
OPTION
2/2
≥MAIN
MTS
SAP
MONO
OUT1[VCR/DVD]
MANUAL ≥AUTO
VCR
s/r:
SELECT
:
END
:MENU
Display Symbols
When video from the video
cassette is selected
When video from the
disc is selected

Basic Playback

Preparations
≥Confirm that the TV is on and the unit viewing channel is
selected.
≥Switch [VCR/TV/DVD] to "VCR".
≥Press [VCR Í] to turn on the unit.
≥Press [VCR/TV] to select the VCR mode.
Operations
1
Insert a recorded video cassette
tape.
2
Start viewing the picture by
pressing [ 1](PLAY).
≥Play starts automatically if you insert a
prerecorded tape or one that has had its
tab (Tapes lpage 5) removed.
3
Search forward (Cue)/backward
(Review) by tapping [ 5] or [6].
≥To change back to normal playback,
press [ 1](PLAY).
≥If you keep [ 5] or [6] pressed,
search playback is activated while the
button is pressed, and operation returns
to normal playback when the button is
released.
4
View a still picture by pressing [;/D].
≥To continue normal playback, press
[ 1](PLAY) or [;/D].
5
View a slow motion picture.
≥Keep [;/D] pressed for 2 seconds or
more.
≥To continue normal playback, press
[ 1](PLAY).
To stop viewing the picture
Press [
].
To Eject the Video Cassette Using the Remote Controller
You can eject the video cassette with [<VCR EJECT] on the unit.
You can also use the remote controller. Keep pressing [
remote controller for at least 3 seconds.
Fast-forwarding or Rewinding the Tape
Press [ 5] or [6] in the stop mode.
≥To stop fast-forwarding or rewinding, press [
To Obtain a Higher Speed Rewind (Jet Rewind)
Press [JET REW6].
The "J : REW" indication appears on the TV screen and the unit's
display. (except when the remaining tape time indication appears)
≥Depending on a cassette or an operating condition, the rewind
speed may change somewhat.
≥The tape counter is reset to "0:00.00" when the tape is rewound
to the beginning.
≥Depending on a cassette, this function may not work.
≥To stop Jet Rewind, press [
S-VHS Quasi Playback (SQPB)
It is also possible to play back tapes recorded in the S-VHS
system.
≥Some picture noise may occur depending on the type of tape
used.
≥It is not possible to fully obtain the high resolution that S-VHS
is capable of.
It is not possible to record in the S-VHS system with this unit.
17
Display Symbols
] on the
].
].
(continues on the next page)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-vp300p

Table of Contents