Key Combinations
NOTE
Do not repeatedly press the keys in quick succession.
Do not use the key combinations together with touch pad (external mouse), touchscreen (only for model with touch-
screen) or other key operations.
Do not use the key combinations before you log on to Windows. Wait until the hard disk drive indicator
the Setup Utility screen, you can use the key combinations of Fn + F1, Fn + F2 and Fn + F3. By using the key com-
binations of Fn + F3, the display is switched between the internal LCD, simultaneous display
play.
The key combinations may not work with some applications.
The pop-up icon appears after logging on to Windows. It may not appear in some application conditions.
*1
Only for model with Mobile Intel
Key
Fn + F1
LCD brightness
(Fn + F1= down / Fn + F2= up)
Fn + F2
Fn + F3
Display mode switching (
When an external display (a projector etc.) is connected you can change the dis-
play mode. (The change you made may not be effective until Enter is pressed.)
You can also change the display mode by pressing
Computer only
NOTE
When an external display is connected to an optional port replicator (CF-
VEB522), the display switching may work differently from the above. For
further information, refer to the instruction manual of the port replicator.
CAUTION
Do not press any keys until the display has finished switching.
Do not use this function:
• When playing motion video such as DVD or MPEG.
®
PM45 Express Chipsets
Function
page
43)
Duplicate
Extend
+ P.
Projector only
3
turns off. On
*1
and the external dis-
Pop-up icon