8. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
For 128 bit WEP encryption with hexadecimal input, enter
■
26 characters, from 0 to 9 and from A to F.
For 64 bit WEP encryption with hexadecimal input, enter 10
■
characters, from 0 to 9 and from A to F.
For 128 bit WEP encryption with ASCII or text input, enter
■
13 alphanumeric characters.
■
For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
9. When you're done making these settings, highlight the
button at the top of the screen, then press
and press
Complete
save your settings.
Enabling WPA Security
1. Press
. Highlight
Menu
2. Choose
Network Configuration
3. Highlight
Security
screen:
, then choose
Enter
Yes
and then press
Network
and press
, then press
. You see the following
Enter
Return
. Choose
Enter
Setup
and press
to
Enter
.
Enter
.
Enter
Setting Up Network Projection
83