Using The Pens - Epson BrightLink 450Wi Start Here Manual

3 Launch Easy Interactive Driver
1
Look for the
screen (Windows) or in the Dock (Mac OS).
•
If you don't see the icon in Windows, you may need
to click the arrow(s) to show hidden icons.
Click if necessary
•
If a red X appears on the icon
and projector may not be connected correctly. Make
sure the projector is powered on and the USB cable
is connected to your computer.
2
If you don't see the icon, make sure you have the
program on your computer. Do one of the following to
check:
•
Windows: select
Programs > Epson Projector > Easy Interactive
Driver.
•
Mac OS X: open the Applications folder, then open
the Easy Interactive Driver folder and select the
Easy Interactive Driver icon.
pen icon in lower right corner of your
, the computer
or Start > All Programs or

Using the Pens

Make sure the batteries are installed in the
interactive pens. Your BrightLink came with
rechargeable batteries and a charger.
•
Press the button on the pen. If the light turns
green, the batteries are installed and charged.
Battery indicator light
•
Hold the pen at an angle, rather than
perpendicular to the board.
•
To left-click, tap on the board.
•
To double-click, tap twice.
•
To right-click, press and hold the button on the
pen, then tap the board.
•
To click and drag, tap and drag with the pen.
If you use the pens for several hours every day,
you may have to recharge the batteries once a
week. If you use them less often, you may only
have to recharge once a month.
Tip: You can only write with one pen at a time,
but you can use both pens and trade off. To learn
more about EID and the BrightLink pen, watch the
videos we made just for you on the included DVD.
Button