Table of Contents
Advertisement
6
Installing PC Cards
Before You Begin
To install a PC card, you need:
Caution
To avoid potential equipment malfunction, Nokia recommends that
you obtain PC cards only from Nokia or authorized resellers. For
further information, contact the appropriate Nokia customer support
site listed in
Installing a Flash Memory PC Card
Caution
You risk damage to the appliance or loss of data if you do not use the
following procedure when you replace the PC card.
Note
You can use only one of the slots at a time, and Nokia recommends that
you use only the top PC-card slot for optimum ESD protection.
To install the flash-memory PC card
1. Insert the PC card into PC-card slot 1 or slot 2.
2. Press gently on the card until it is firmly seated in the slot.
54
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
Physical access to the appliance
Access to the appliance by using Nokia Network Voyager or the
command-line interface (CLI)
Replacement PC card and accompanying documentation
"Nokia Contact Information"
The eject button to the left of the slot should be flush with the card.
on page 3.
Advertisement
Table of Contents
